Siemens IE2 Motors

Home/Siemens IE2 Motors
Siemens IE2 Motors 2017-04-29T04:59:47+00:00

IE2 Series Motors “Champion” – High Efficiency Motors

IE2 series motors are offered from 0.37kW – 375kW in 2, 4 & 6 Pole.

These squirrel cage Induction motors confirming to the IS: 12615 / IEC: 60034-1 are offered in Cast Iron housing with IP 55 protection and with IC411 cooling as per IS: 6362 TEFC.

The Champion IE2 Series motors are offered for an Ambient of  50°C, for Altitude < 1000m, with Class F insulation, 63 Series bearing for frame 160 and above with identical bearings at DE and NDE which helps in reducing the inventory. These motors are also provided with Regreasable bearings for frames 160 onwards.

 

 

Siemens IE2 Motors

Ordering Data Sheet

KW HP 2Pole-3000RPM 4Pole-1500RPM 6Pole-1000RPM
0.37 0.5 1SE0 070-2NC70 1SE0 073-4NB70 1SE0 080-6NB70
0.55 0.75 1SE0 073-2NC70 1SE0 080-4NB70 1SE0 083-6NA70
0.75 1 1SE0 080-2NC70 1SE0 083-4NA70 1SE0 090-6NA70
1.1 1.5 1SE0 083-2NC70 1SE0 090-4NA70 1SE0 096-6NA70
1.5 2 1SE0 090-2NB70 1SE0 096-4NA70 1SE0 106-6NB70
2.2 3 1SE0 096-2NB80 1SE0 106-4NA80 1SE0 113-6NB80
3.7 5 1SE0 107-2NA80 1SE0 113-4NA80 1SE0 131-6NB80
5.5 7.5 1SE0 130-2NC80 1SE0 130-4NA80 1SE0 134-6NB80
7.5 10 1SE0 131-2NC80 1SE0 133-4NA80 1SE0 163-6NB80
11 15 1SE0 163-2NB80 1SE0 163-4NA80 1SE0 167-6NB80
15 20 1SE0 164-2NB80 1SE0 166-4NA80 1SE0 186-6NA80
18.5 25 1SE0 166-2NA80 1SE0 183-4NA80 1SE0 206-6NA80
22 30 1SE0 183-2NB80 1SE0 186-4NA80 1SE0 207-6NA80
30 40 1SE0 207-2NB80 1SE0 207-4NA80 1SE0 223-6NA80
37 50 1SE0 208-2NB80 1SE0 221-4NB80 1SE0 254-6NB80
45 60 1SE0 224-2NB80 1SE0 224-4NB80 1SE0 281-6NA80
55 75 1SE0 254-2NB80 1SE0 254-4NA80 1SE0 284-6NA80
75 100 1SE0 281-2NB80 1SE0 281-4NB80 1SE0 311-6NB80
90 120 1SE0 284-2NB80 1SE0 284-4NB80 1SE0 314-6NB80
110 150 1SE0 311-2NC80 1SE0 311-4NA80 1SE0 318-6NA80
132 180 1SE0 314-2NC80 1SE0 314-4NA80 1SE0 319-6NC80
160 215 1SE0 318-2NC80 1SE0 318-4NA80 1SE0 356-6NB80
200 270 1SE0 319-2NC80 1SE0 319-4NA80 1SE0 357-6NC80
250 335 1SE0 356-2NC80 1SE0 356-4NB80 1SE0 358-6NB80
315 425 1SE0 357-2NC80 1SE0 357-4NB80

Special Designs

The following special features/accessories can be provided on the motors, on request:

• Non-standard output
• Non-standard voltage and/or frequency
• 3no. PTC thermistors for trip (class B)
• 3no. PTC thermistors for trip (class F)
• 6no. (3 alarm + 3 trip) PTC thermistors, (class B)
• 6no. (3 alarm + 3 trip) PTC thermistors, (class F)
• 3no. PT 100 RTDs for windings
• Anticondensation heaters
• Epoxy gel coat on winding overhangs
• Non-standard paint shade
• Epoxy based paint
• Unpainted, only with primer
• Degree of protection IP56 / IP65
• Motors for converter fed operation
• Mounting arrangement for rotary pulse encoder – Hübner or Leine & Linde make or any other make of Parallel hollow shaft
Encoders
• Non-standard shaft extension
• Standard Double shaft extension
• Non-standard Double shaft extension
• Vibration severity Grade A (IS: 12075) for frames 160M to 250M
• Roller bearing at Drive end
• Labyrinth seal
• Cable entry from DE/NDE with top mounted T. Box
• Terminal box on Right hand side (seen from drive end)
• Terminal box on Left hand side (seen from drive end)
• Larger size terminal box for frames upto 250M
• Flying leads (length to be specified)
• Different types of Constructions as shown on page 4
• Provision of threading for fixing Shock Pulse Monitoring [SPM] Probe for vibration measurement